Home | Products | ZigBee | F8X14 ZigBee IP Modem |



TAGS: ZigBee IP MODEM supplier ZigBee DTU supplier

      Support data transfer by cellular and ZigBee network
      Embedded Real Time Clock(RTC) circuit which can realize timing online/offline function
      TTL logic level RS232 interface can be customized 
      Support APN/VPDN
      Supply 5 I/O channels, compatible 2 pulse wave output channels, 2 analog inputs and one pulse input counters 
      Support multi online trigger ways, including SMS, ring and data. Support link disconnection when timeout
      Support hardware and software WDT
      Provide management software for remote management
      Support low power consumption mode, including multi-sleep and trigger modes to reduce the power dissipation farthest
Features Specification Download



F8214 ZigBee + CDMA IP MODEM is a kind of data terminal device that provides data transfer function by public CDMA and ZigBee network.It has been widely used on M2M fields, such as intelligent transportation, smart grid, industrial automation, telemetry, finance, POS, water supply, environment protection, post, weather, and so on.


Environmental Adaptability
Designed for harsh and unattended environment



Powerful network conversion capability

ZigBee to TCP/IP protocol (4G/3G/2.5G network) implement two kinds of network communication agreement




ModbusIntegrated Modbus standard protocol

Remote PC can collect and transfer the data by 4G/3G/2.5G and ZigBee network.



Simultaneous transmission of multiple data centers

Support multiple data transmission and multi-data center backup center synchronous transmission (five data centers), applicable to rapid or large transmission of information




Reliable networking and transparent data communication

Using high-performance industrial grade wireless modulehigh stability and high precision industrial grade components, a very wide temperature design, easy to adapt to cold temperature working environment that supports transparent data transmission, can adapt to any standard or non-standard user protocol.


zigbee WDT
WDT watchdog

Running protection system management and effective monitoring to ensure system stability.





Rich interfaces, convenient for customers to use

Provide 5 x I/O, can achieve 5 digital input and output; Compatible with 3 pulse outputs, 3 analog inputs, 2 pulse counting function. Provide a standard RS232, RS485 interface for direct connection of serial devices.







Cellular Specification
Item Content
Cellular Module Industrial cellular module
Standard and Band CDMA2000 1xRTT 800MHz,
Bandwidth 153.6Kbps
TX power <30dBm
RX sensitivity <-104dBm
ZigBee Specification

Item Content
ZigBee Module Industrial ZigBee module
Standard and Band IEEE 802.15.4
ISM 2.4 GHz
Indoor/Urban Range 60m
90m(for enhanced version)
Outdoor/RF Line-of-Sight Range 1200m
3200m(for enhanced version)
Transmit Power 3.1 mw (+5dBm) /Normal mode, 6.3 mw (+8dBm)/Boost mode
63 mw (+18dBm) (for enhanced version)
Bandwidth 250Kbps
Receiver Sensitivity -102dBm
Network Topologies Point-to-Point, Point-to-Multipoint, Peer-to-Peer and Mesh
Number of channels 16 Direct Sequence Channels
15 Direct Sequence Channels (for enhanced version)
Channels 11 to 26
11 to 25 (for enhanced version)
Hardware System

Item Content
CPU Industrial 32 bits CPU
FLASH 512KB (Extendable)
SRAM 256KB(Extendable)
Interface Type

Item Content
Serial 1 RS232 port and 1 RS485(orRS422) port, 15KV ESD protection
Data bits: 5, 6 ,7, 8
Stop bits: 1, 1.5, 2
Parity: none, even, odd, space, mark
Baud rate: 110~230400 bps
Indicator "Power", "ACT", "Online", "ZigBee"
Antenna Cellular: Standard SMA female interface, 50 ohm, lighting protection(optional)
ZigBee: Standard SMA female interface, 50 ohm, lighting protection(optional)
SIM/UIM Standard 3V/1.8V user card interface, 15KV ESD protection
Power Terminal block interface, reverse-voltage and overvoltage protection
Power Input

Item Content
Standard Power DC 12V/0.5A
Power Range DC 5~35V
Power Consumption

Working States Power Consumption
Communication 50-85mA@12VDC;115-160mA@5VDC
Standby 25mA@12VDC;45mA@5VDC
Sleep 8mA@12VDC;18mA@5VDC
Timing Power Off 0.6mA@12VDC;1mA@5VDC
Physical Characteristics

Item Content
Housing Iron, providing IP30 protection
Dimensions 91x58.5x22 mm
Weight 210g
Environmental Limits

Item Content
Operating Temperature -25~+65ºC (-13~+149℉)
Extended  Operating Temperature -30~+75ºC (-22~+167℉)
Storage Temperature -40~+85ºC (-40~+185℉)
Operating Humidity 95% ( unfreezing)