F-R100 3G/4G Cellular Router

TAGS: 4G Cellular Router 3G Cellular Router Cellular Router Din Rail cellular bonding router

      Ethernet, serial and I/O for connecting diverse field assets

      Maximizes uptime by seamlessly switching between the multiple Internet interfaces

      Secure your data using a variety of VPN tunneling schemes

      Din-Rail or wall mounting or desktop
Features Reference Download

1

 

Advanced Failover

\

Maximise uptime by seamlessly switching between the multiple Internet interfaces (cellular, WAN, Wi-Fi, dual-SIM)

2

Multiple Tunnelling Schemes

\

Secure your data using a variety of VPN tunnelling schemes, including IPSec, L2TP, PPTP, Open VPN and GRE

3

Flexible Wi-Fi

\

802.11 b/g/n, configurable Wi-Fi as WAN or access point, Wi-Fi Security (WEP / WPA / WPA2 Mixed Mode) and multiple SSID

4

Serial Port

\

Ethernet, serial and I/O for connecting diverse field assets

5

Support devices configuration, upgrade and maintenance remotely, greatly improve the efficiency of management

 \

Four-Faith Remote Manager provides mass configuration, device management, OTA update, and troubleshooting tools


M2M Applications



M2M Applications
The Four-Faith F-R100 3G 4G Cellular Router Din Rail bonding is an intelligent cellular router designed for industrial applications requiring faultless connectivity. It provides a secure, reliable, real-time, remote connectivity for SCADA, distribution management systems, metering etc. Software-defined, multi-carrier networking, dual SIM models, 802.11n and global 2.5G/3G/HSPA+/LTE options make it easy to get connected. With DIN-rail mounting, wide operating temperature range, and IP30 metal housing, the F-R100 is a convenient yet reliable solution for any industrial wireless application.

CELLULAR WAN Supported Frequency Bands
LTE: B1, B2, B3, B4, B5, B7, B8, B20, B28
WCDMA: 2100(B1), 1900(B2), 850(B5)
EV-DO/CDMA: 800(BC0)
GSM/GPRS/EDGE: 850/900/1800/1900
Automatic SIM based network operator switching
 
HOST INTERFACES 10/100 Base-T RJ45 Ethernet port
RS-232 or RS-485 Serial Console Port
3 SMA antenna connectors (WI-FI and Double-cellular)
Active GPS/ZigBee antenna support (option)
(6) pin 3.5mm terminal block
INPUT/OUTPUT (6) pin 3.5mm terminal block
(2) DI, (1) DO, (1) Relay.
Input ON Voltage: 5 to 30 VDC
Input OF Voltage: 0 to 3 VDC
Output < 50mA @ 30VDC
LAN DNS, DNS Proxy
DHCP Server
IP Passthrough (option)
VLAN
Host Interface Watchdog
PPPoE
SERIAL TCP/U DP PAD Mode
Modbus (ASCII, DTU, Variable)
PPP
Reverse Telnet
WI-FI IEEE802.11 b/g/n, AP and client mode.
Adjustable output power (Max: 26dBm)
Access point for up to 30 clients
Simultaneous access point/client mode
WEP, WPA-PSK, WPA2-PSK etc. Security
NETWORK AND ROUTING Network Address Translation (NAT)
Port Forwarding
Host Port Routing
VRRP
Reliable Static Route
Dynamic DNS
VPN IPsec, GRE, and OPENVPN Client
Up to 10 concurrent tunnels
Split Tunnel
Dead Peer Detection (DPD)
Multiple Subnets
VPN Failover
 
SECURITY Remote Authentication
DMZ
Inbound and Outbound Port filtering
Inbound and Outbound Trusted IP
MAC Address Filtering
PCI DSS V3.0 compatible
GPS (Option) Antenna Interface: SMA Female, 50 ohms impedance
Tracking Sensitivity: better than -144 dBm
Horizontal position accuracy: 2.5 m
Time-To-First-Fix: 29 s
Protocol: NMEA-0183 V2.3
EVENTS ENGINE (Option) Custom event triggers and reports
Configurable interface, no programming
Event Types: Digital Input, Network Parameters, Data Usage, Timer, Power, Device Temperature
Report Types: RAP, SMS, Email, SNMP Trap, TCP (Binary, XML, CSV)
Event Actions: Drive Relay Output
Four-Faith MANAGEMENT SERVICE Secure cloud-based device management application
Remote provisioning
Gateway configuration and template management
Configurable monitoring and alerting
Software and radio module firmware updates
Auto configuration
MANAGEMENT INTERFACES Web-Based User Interface
Device Configuration Templates
Software and radio module firmware updates
AT Command Line Interface (Telnet/SSH/Serial)
SMS Commands (Option)
SNMP
Operating Environment Operating Temperature: -35°C to +75°C / -31°F to +167°F
Storage Temperature: -40°C to 85°C / -40°F to 185°F
Humidity: 90% RH @ 60°C
DIMENSIONS Housing & Weight: Metal, **g
Dimension: (L x W x H): 133 x 115.7 x 45 mm
Installation: 34.6 mm Din-Rail or wall mounting or desktop